Home  |  About ANYI   |   Products   |   Service + Support   |   Testimonials   |   Expertise   |   Contact   |     
    Standard Reference
    Precision Step Gauges
    Swivel Support
    Module masters
    Gauge blocks
    Slide Calipers
    Digital Calipers
    Dial Calipers
    Vernier calipers
    Digital Scale Units
    Depth Gauges
    Digital Depth Gauges
    Dial Depth Gauges
    Vernier Depth Gauges
    Height Gauges
    Digital Height Gauges
    Dial Height Gauges
    Vernier Height Gauges
    Micrometer Heads
    Outside Micrometers
    Inside Micrometers
    Depth Micrometers
    Thickness gauges
    Special Calipers
    Special Designs
    Data Interfaces
    Surface Plates
    You are here: Home >> product >> Standard Reference Artifacts

    Product Show

    Module Master
    Inquire Now
    Features :
    The accuracy of electronic digital caliper depends on the accuracy of mechanical parts , electronic module and stator strip sensor. Manufacturing electronic module needs high technology and special precision equipment. There are several manufacturers of electronic modules in China.But only one manufacturer can make electronic module with high accuracy. All low-end electronic digital calipers use electronic modules with low accuracy. How can we know the accuracy of electronic module? Just check the accuracy of digital caliper with gauge blocks with decimals, such as 1, 1.5, 2,2.5 3, 3.5, 4, 4.5, 5mm or with a module master (from 5mm to 10mm, the correct way is to set zero while the measuring faces of the digital caliper’s lower jaws contact the module master at 5mm and then begin to measure in order to avoid the errors of the stator, the measured value should be 0, 0.5,1,1.5,2,2.5,3,3.5,4,4.5,5mm which corresponds to 5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10mm), you can easily find out the accuracy of the module. If the accuracy is≤0.01mm, it shows the module’s accuracy is high. If the accuracy is ≥0.02mm, it shows the module’s accuracy is low. To check modules with individual gauge block is time consuming. Anyi’s specially designed Module Master can check modules faster and easier.
      Specifications :

    Measuring Range Order No. Type Limit Error
    5-10mm 019-101 Steel ±3μm
    << back
    CopyRight © 2009 Anyi Instrument Co.,Ltd All Rights Reserved